🛠️ Laser Cutting Machine Maintenance Guide
✅ Daily Maintenance
- Check the Copper Nozzle: Ensure it emits light correctly, clean and unblocked.
- Inspect the Protective Lens: Clean and replace if damaged. Calibrate after replacement.
- Check Water Cooler: Ensure water level is within the marked range.
- Gas Supply: Monitor pressure, replace when low, report if no spare gas is available.
- Dust Removal: Blow dust from light guide sheath with compressed air.
- Guide & Screw Cleanliness: Remove any dust or foreign material.
- Empty Trash Box: Remove product debris and dispose in the designated area.
- Clean Work Area: Tidy the ground, workbench, electrical cabinet, laser head, etc.
📅 Weekly Maintenance
- Focusing Lens: Clean carefully; do not scratch.
- Dust Control: Use compressed air on control cabinet, machine body, fan heaters.
- Oil Level Check: Ensure oil is at proper level and top up if needed.
- Trash Box: Clean under the workbench weekly.
🗓️ Monthly Maintenance
- Delete Old Cutting Programs: Free up machine memory.
- Clean Exhaust Filters: Remove dust from fan and filter screens.
- Lubrication: Lubricate guide rails and screw rods.
📆 Quarterly Maintenance
- Mirror Maintenance: Clean reflective mirror and polarizer carefully. Check vacuum pump oil.
- Cooling Water: Replace if turbid.
🔁 Regular Maintenance (Every 1000 Hours)
- Dryer Valve: Disassemble and clean drain valve.
- Optical System: Clean reflective lens and check optical path alignment.
- Vacuum Pump Oil: Replace oil; ensure sufficient amount available before replacement.
💡 Tip: Regular maintenance ensures stable performance, improves cutting quality, and reduces long-term costs.
